Displacement: 20cccc
Speed: 2090r/minrpm
Mowing width: 550mm
Cutting height: 20-180mm
Walking speed: 0-7km/h
Adjustable height: 10-180mm
Climbing angle: less than or equal to 60°
Applicable places: flat land, hillside
Scope of application: gardens, lawns, wastelands, weeds, orchards, slopes
Power type: pneumatic
Single product weight: 136KG

Features:
1. The whole machine is small in size, large in horsepower, compact in structure, flexible in operation and able to work under trees.
2. Crawler drive, strong climbing ability.
3. Realize the separation of man and machine, the cutting efficiency of 2000-3000 square meters per hour, so that the operator can escape from heavy physical labor and away from dangerous areas.
4. Use high-quality brand engines, low fuel consumption and high efficiency;
5. Thickened blade, durable;
6. Factory direct sales, quality is guaranteed, and customization is supported

Preparation before turning on the remote control lawn mower
(1) Be sure to confirm the tightness of the screws of each component before starting work.
(2) Turn on the power key switch of the machine, pull the right control lever backward to hold it, and then press the on/off key of the remote control to turn on the remote control.
(3) After the remote control is turned on, there will be a ‘di’, indicating that the machine matches the remote control normally.
(4) Engine start;
a. Release the brake on the right side of the engine (the flameout switch is also disconnected);
b. Twist the left throttle to the end counterclockwise (this opens the engine throttle at the same time);
c. Pull the rope of the hand plate hard to start the engine;
d. After starting the engine, adjust the throttle to the proper speed in time;
e. Operate the remote control to mow the grass.